Poultry House Cleaning & Feeding Panel

poultry house feeding and cleaning panelThis panel was built to control 24 x 3PH motors in a battery hen house, In the battery house were built 12 banks of cages, 5 cages high, each bank had two motors.

The first motor controlled the Feeders, The second motor controlled the manure belts.

THE FEEDERS, Were of a chain type which ran around the cages in a trough, each motor had a contactor and overload to control it. On the door is a Manual/Automatic switch, A Green lamp for run and a Red lamp for overload.

THE CLEANING, Is done by an endless conveyor belt and each motor had a contactor and overload to control it. On the door is a Manual switch, A Green lamp for run and a Red lamp for overload.

The top photo shows the front door of the control panel, The photo on the left shows the panel after it was built, the last photo shows the control panel after it had been installed and tested.